Mold testing in Whites Creek involves air, surface or wall cavity samples sent to a lab to check for hidden growth or confirm a cleanup. It's most helpful in older homes where a smell has no obvious source. Call the number on this page to be connected with a local mold inspector in Whites Creek.
About Whites Creek
Whites Creek is a rural Metro Nashville community about 8 miles north of downtown. Its 157-acre historic district, with buildings from the 1830s to the early 1900s, is described as the city's only historic rural area. The creek that gives the community its name runs north to south along U.S. Route 431. In May 2010, measured downstream at the Bordeaux gauge, Whites Creek crested at 25.82 feet, more than 6 feet above its 2002 record. Most homes in ZIP 37189 are owner-occupied, with roughly 23 percent rented.
Steps before you book a test
- Walk the house with your nose. Note where the smell is strongest: a closet, the space under stairs, a back bedroom over the crawl space.
- Look at the obvious places first: under sinks, around the water heater, the crawl space entry, attic sheathing near vents.
- If you find growth you can see, EPA says a lab test usually adds little. Fix the water source and clean or remove it.
- If the smell has no source, plan a test that includes an outdoor sample and indoor samples in the problem rooms.
- Gather any history you have, especially whether the house took water from the creek in 2010.
What you see and what usually causes it
| What you see | Likely cause |
|---|---|
| White, fuzzy growth on crawl space soil or piers | Damp ground and little air movement under the house |
| Dark stain spreading from a window corner | Failing glazing or flashing letting rain into the wall |
| Swollen floorboards near an old back porch door | Water running toward the house from poor grading |
| Musty smell in a room added onto an older house | Different foundation or roof line trapping moisture where they join |
| Spotting on outbuilding walls and stored hay or tack | Humid air with no ventilation |
What drives the cost
For a mold test, Angi reports a national range of roughly $250 to $500, more with extra samples. Rural Metro addresses may see travel built into a quote, and Middle Tennessee prices vary. Sample count, wall cavity sampling, lab speed and a bundled inspection all add up. If removal follows and the residential job runs $3,000 or more, Davidson County is one of the places where the contractor needs the state Home Improvement license. Building permits for any structural repairs come from Metro Codes.
Mold Testing questions in Whites Creek
Does a house need testing after it floods?
Is mold testing worth it before buying a house?
Is there a safe number of mold spores?
Where can I take health questions about mold?
More mold services in Whites Creek
Mold Testing nearby
Sources
- Wikipedia: Whites Creek, Tennessee
- City-Data: ZIP 37189 profile
- National Weather Service Nashville: May 2010 flood
- EPA: Mold Information Slideshow (testing and sampling)
- Angi: How Much Does a Mold Inspection Cost? (2026 data)
- TDCI: Bidding and Contractor License Requirements (pdf)
- Metro Codes: Residential Building Permits
- Metro Nashville: Mold, Moisture, and Your Home (pdf)
Last updated: