An Eagleville wall with mold in it has been holding moisture, most often from a plumbing leak, rain working past a window or siding, or condensation on a cool outside wall in humid weather. Removal means fixing the source, taking out moldy drywall and insulation, cleaning and drying the framing, and closing the wall back up once dry. Call the number on this page to be connected with a local mold remediation company in Eagleville.

What usually causes wall mold in a rural Eagleville home?
Eagleville is a small city of about 800 people in southwestern Rutherford County, around 30 miles from Nashville, and the 2020 Census counted every resident as rural. Without a major river through town, wall mold here mostly comes from the house itself: supply lines to sinks and toilets, washing machine hoses, water heaters, shower valves, and windows that let rain in during spring storms. Middle Tennessee summers add the other ingredient. Warm, damp air reaches the cool surface of an exterior wall or a closet corner, condenses, and keeps the drywall paper damp enough for mold. The Tennessee Department of Health notes that spaces often above 50 percent relative humidity need moisture reduction, and EPA recommends keeping indoor humidity below 60 percent.
Do I need testing before anything gets torn out?
Usually not. EPA says sampling is generally unnecessary when mold is visible, and there are no federal limits for mold spores. What matters more is a moisture survey: a meter across the wall, possibly a thermal camera, and a small inspection hole if readings are high. That shows the company how much to remove. Testing after cleanup, ideally by a separate company as Angi recommends, can confirm the area was cleaned properly.
What should I expect to pay, and who can do it?
Angi reports a national range of about $1,000 to $20,000 for mold in walls, often figured at $10 to $25 per square foot; Middle Tennessee prices vary. Rutherford County is on the state's Home Improvement license list, so residential jobs of $3,000 up to $25,000 need that license, and anything $25,000 or more needs a contractor's license with the S-F mold remediation classification. Check any company on TDCI's Verify a License search.

Permits in Eagleville
If framing has to be replaced after cleanup, start with Eagleville City Hall, which sets permit fees and fields permit questions; Rutherford County Building Codes supplies the certified inspectors and plan review. Since Eagleville has no separate complaint office named for rentals, tenants with an unrepaired leak can start by asking City Hall where to report it. The Rutherford County Health Department in Murfreesboro is the local health office.
Mold in Walls & Drywall questions in Eagleville
Why does mold keep coming back on the same outside wall?
Who fixes the leak, the mold company or a plumber?
Can I paint over mold on a wall with a stain-blocking primer?
Do I need a permit to rebuild the wall after mold removal?
More mold services in Eagleville
Mold in Walls & Drywall nearby
Sources
- Eagleville, Tennessee (Wikipedia)
- City of Eagleville: Permits general information (pdf)
- Rutherford County Building Codes: About Us
- Tennessee Department of Health: Healthy Homes
- Tennessee Department of Health: Local Health Departments
- EPA: A Brief Guide to Mold, Moisture and Your Home
- EPA: Mold Information Slideshow (testing and sampling)
- Angi: How Much Does Mold Remediation Cost? (2026 data)
- Angi: How to Hire a Mold Remediation Company
- Tennessee Contractor Classification Outline (TDCI)
- TDCI: Bidding FAQs
- TDCI: Bidding and Contractor License Requirements (pdf)
Last updated: